The PiN photodiode SFH206 from the vendor Osram was tested and characterised in the lab to obtain the power curve.
Lab Characterization of the Solar Cell IXYS KXOB22
Here the solar cell IXYS KXOB22 -04X3F is going to be tested in the lab. These solar cell were chosen in a project for solar energy harvesting.
Solar Cell Verilog Model for Cadence
A model of the solar cell is built in Verilog-ams. This is needed in order to perform the simulation of the MPPT in a Solar Energy Harvester.
How to change the wire colour in Cadence
Change the color of some wires in Cadence Virtuoso can be useful in schematics with a lot of wires.
The fastest FPGA PWM Signal with Zybo and Vivado (VHDL)
How to generate a high-frequency PWM signal with an FPGA (Zybo) writing a custom IP in Vivado.
Active Filters: 2nd order Tschebychev Bandpass
A second order active bandpass filter by cascading two staggered tuned first order bandpass filters is shown, built and tested.